The Manufacturing Steps of Flex Circuit Boards

Are you considering a flex circuit for your product? These boards are perfect choices for various applications due to their incredible characteristics.

In the future, the trend of flexible PCB is dramatically increasing and you will find it in all electronic devices. We will break down the process of flexible printed circuit in manufacturing steps for a better understanding.

The first step involves the flex PSB build up. To save polyimide, it is important to keep circuits close with each other as much as possible. You can achieve it by using the nesting technique.

Next, you can add a slight amount of extra material to the flex circuit beyond the designer’s limit. This small amount of extra material commonly known as a service loop. Looping enhances the servicing length and assembly of the circuit.

The sizing conductor ensures the greatest flexibility of the circuit and is worth to select the thinnest copper, especially when you want to use the circuit for dynamic applications.

Etching process takes place by utilizing the etching factor. You can use this tool to compensate for any isotropic loses in the manufacturing process. During the etching process, line width loss is almost twice the copper foil thickness.

You can achieve routing of the conductors on a flex circuit easily. It improves the folding and bending by reducing stress in these specific regions.

You should create ground areas crosshatched if the electrical allocation is adequate. Afterward, you can improve the flexibility of the circuit. All you need to reduce the weight of the circuit board.
Let’s examine what happens in the process of flexible printed circuit boards.

It’s possible for the manufacturer to create holes as small as possible. These types of vias make capable of the flexible PCB layout to be well inclined.

The pads and land termination points on the flexible circuits need filleting. By using this technique, you can multiply the area of the pad and distributes the stresses.

Button plating method creates a substitute plated through-hole. The only difference is that manufacturers use copper to create vias and through-holes.

In this last step, consider physical constraints as manufacturers concentrate on some other useful components of Flex PCB. There are many types of cover coating and have many unique traits.
Overall, flexible PCBs are mostly manufactured by utilizing these three steps. This process can vary from one manufacturer to another.

Share this post...Share on FacebookShare on Google+Tweet about this on TwitterPin on PinterestShare on LinkedInEmail this to someonePrint this page

Leave a reply